The grip operates on the bollard and clamp principle. The bollard is 20mm in diameter and made from stainless steel. The clamp consists of a pair of friction washers and a thumbscrew. Click for more details...
The rope is wrapped around a bollard, once or twice, depending on it’s diameter and then the tail is clamped in a vice. The bollard diameter is 40mm. The vice will accommodate rope up to 8mm maximum. Click for more details...
A bollard type rope grip with a manual vice for clamping the tail end of the sample. The bollard diameter is 150mm which gives a 10:1 ratio of maximum rope diameter to bollard diameter as prescribed by BS EN 919. Click for more details...
A bollard type rope grip with a manual vice for clamping the tail end of the sample. The bollard diameter is 2000mm which gives a 10:1 ratio of maximum rope diameter to bollard diameter as prescribed by BS EN 919. The rope is held over one full circumfe Click for more details...
The rope is wrapped around each bollard, once or twice, depending on it’s diameter and then the tail is clamped in a vice. The bollard diameter is 40mm. Click for more details...
