Designed to measure the coefficient of friction between two pieces of film at a constant speed with a fixed pressure between the surfaces. The jig consists of a long flat bed and a sled. The sled is moved along the bed by the testing machine. The sled connects to the machine loadcell via a thread passing over a low friction pulley. Sled speed is therefore identical to machine speed, and friction load is measured directly.

Available as two versions, either to BS2782 Pt8 or ASTM D1894. If required the ASTM sled can be supplied with the BS assembly, allowing both tests to be performed with only one jig. The baseplate has a clamp at the rear to hold the sample during the test, the sample can also be taped to the baseplate if required. The sleds are designed to give the correct pressure between the two halves of the sample as defined by the relevant standard. Samples are fixed to the sled using conventional or double sided adhesive tape. A bi-directional spirit level and adjustable feet allow the baseplate to be levelled.